Trouble check

Others

Symptom

Cause and/or corrective actions

While editing using the DV connecting

• Remove the DV connecting cable, and connect it

cable, recording picture cannot be

again.

monitored.

 

The camcorder becomes warm.

• If the power of the cammcorder is on for a long time,

 

it becomes warm, which is not malfunction.

The supplied Remote Commander does not work.

•Something is blocking the infrared rays. mRemove the obstacle.

•The battery is not inserted with the correct polarity. mInsert the battery with the correct polarity. (p. 108)

•The batteries are dead.

mInsert new ones. (p. 108)

No function works though the power is on.

•Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button at the lower left of the LCD screen using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.) (p. 105)

The numbers or letters of 5 characters is displayed as a counter.

•Self-diagnosis function was activated.

mSee the table in page 94 and treat the camcorder appropriately.

AC power adaptor

Symptom

Corrective actions

The VTR/CAMERA or CHARGE lamp

• Disconnect the mains lead. After about 1 minute,

does not light.

reconnect the mains lead. (p. 7)

 

 

The CHARGE lamp flashes.

• See the chart on the next page.

 

 

92