Possible cause | Action |
The wrong emulation is | Check the emulation |
selected. | selection (see Selecting |
| which emulation to use on |
| page 46 of Chapter 4), and |
| change it if necessary. |
The wrong printer has been selected by your application program or system software.
The computer system software is not set up properly for the printer or for the type of interface cable that you are using.
The interface cable is incorrectly connected, or damaged.
Possible cause
Check the printer selection in your application or system software. See the following section, Checking system software settings.
Check the system software settings. See the following section, Checking system software settings.
Check that the printer interface cable is correctly connected. If it is, try a different cable.
ActionI
Your application software is overriding the control panel font selection. This does not apply to systems running Windows.
Use the control panel to inhibit font selection by application software. See the section Presenting software font selection on page 54 of Chapter 4.
