Star Micronics NX-2450 manual Selectgraphics mode

Selectgraphics mode

MODE		ASCII		Decimal	Hexadecimal
Std:	<ESC>	“* ,.	nO	27 42 nO	IB 2A	nO
	nl	n2	ml	nl n2 ml	nl n2	ml
	m2			m2	m2

Selects one of eleven graphics modes depending on the value of nOand prints bit-image graphics in this mode. See the <ESC> “K” command (for 8-bit graphics) or the <FS> “Z” command (for 24-bit graphics) for information on nl, n2, ml, M2, etc.

nO	Graphicsmode
o	8-bit Normal-density	(60 dots per inch)
1	8-bit Double-density	(120 dots per inch)
2	8-bit Double-density, double-speed	(120 dots per inch)
3	8-bit Quadruple-density	(240dots per inch)
4	8-bit CRTgraphics, mode I	(80 dots per inch)
6	8-bit CRTgraphics, mode II	(90 dots per inch)
32	24-bit Normal-density	(60 dots per inch)
33	24-bit Double-density	(120 dots per inch)
38	24-bit CRTgraphics	(9Odots per inch)
39	24-bit Triple-density	(180 dots per inch)
40	24-bit Hex-density	(360 dots per inch)

Page136