Next comes the dot data. Normal character height is 24 dots, so there must be 3 x ml bytes of dot data. If the printer is in super/subscript mode, however, the char- acter height is 16 dots, so there must be 2 x ml bytes of dot data.
Each data byte represents eight vertical dots, with the most significant bit representing the top dot, and the least significant bit representing the bottom dot.
Selectdownload characterset
MODEASCIIDecimal Hexadecimal
Std. | <ESC> “%“ <1> | 27 37 1 | IB 25 01 |
Selects the download character set. Ignored when EDS
switch A3 is ON.
SelectROM characterset
MODEASCIIDecimal Hexadecimal
Std. | <ESC> “%” <O> | 27 37 0 | IB 25 00 |
Stops using the download character set and returns to the
Page139
