Character sets
The following tables show the Standard and IBM char- acter sets. Also shown are the IBM code pages (interna- tional variations of IBM character set #2) and the standard (Epson) mode international character sets (international variations of the Epson Standard charac- ter set).
The decimal character code for each character is shown in an inset at the bottom right of the character.
The hexadecimal character code for a character can be found by reading the hexadecimal column and row numbers, which are at the top and on the left of the table. For example, the character “A” is in column 4 and row 1, so its hexadecimal character code is 41. This is equivalent to decimal 65 (4 x 16 + 1 = 65), which is the decimal number shown in the inset.
Control codes are indicated by abbreviations in angle brackets, e.g. <LF>.
Page153
