Possible cause | Action |
The wrong emulation is | Check the emulation |
selected. | selection (see Selecting |
| which emulation to use on |
| page 46 of Chapter 4), and |
| change it if necessary. |
The wrong character table, code page or international character set is selected.
Check Electronic DIP Switch settings D2, D3, D4 and D5 (see Making Electronic DIP Switch settings on page 37 of Chapter 4).
Static electricity caused by interference from nearby electrical devices or by a low level of humidity is affecting the printer’s operation.
Make sure that the printer is not too close to any devices with electric motors or raise the humidity level.
Inappropriate settings have been selected from your application program.
There are wires missing from the print head.
Choose different settings in your application.
Return the printer to your dealer for repair.
