Printer beep tones
The printer beeps both to warn you that something is wrong and to indicate various aspects of normal opera- tion, for example, to indicate that a particular setting or selection has just been made. The table below gives a full list of printer beeps and their meanings
Tone sequence | Meaning |
Single tone lasting 2 seconds
Single tone lasting several seconds
Four short tones, repeated twice
Single short tone
The printer has detected an error condition. Switch the printer off and on again.
The printer has detected an error condition. Switch the printer off and on again.
The printer is out of paper
One of the following:
●Vertical alignment mode has been selected
●Zoom resolution has been set to 50~0
●Quiet mode has been selected
●Electronic DIP Switch mode has been selected
Two short tones | One of the following: | |
| ● | Macro (saved settings) mode has been selected |
| ● Zoom resolution has been set to 67Y0 | |
| ● Quiet mode has been cancelled | |
Three short torfes | Macro (saved settings) mode has been cancelled | |
Single quarter tone | One of the following: | |
| ● | Hexadecimal dump mode has been selected |
| . | Prevention of software font selection has been |
|
| selected |
| ● Zoom resolution has been set to 10OYO(i.e. | |
|
| zoom is canceled). |
Page150
