
TABLE OF CONTENTS
TOPIC | SECTION/PAGE |
SECTION 4 – SETTINGS AND ADJUSTMENTS (Continued from previous page) Adjusting or replacing the bed knives (Continued from previous page)
Loosen the mounting
Remove the first knife clamp or shield Remove the bed knives
Clean the knife mounting
Mounting screws
Replace the upstroke bed knife Replace the upstroke knife clamp
Remove the down stroke bed
Replace the down stroke knife shields Check the bed knives
Gap adjustment tips
Measure the knife
Set the downstream knife shield Check the knife gap
Tighten the screws to final
Finalize installation of upstroke bed knife
Fasten the cutting
Close the cutting chamber safety interlock Restart the granulator
Adjusting or replacing rotor
Basic facts about the knives Work safely
Open the cutting chamber interlock
Release the cutting chamber
Care in handling
Lock the rotor
Remove the mounting screws Remove the rotor knives
Clean parts for
Mounting screws
Rotors with replaceable knife seats
Tighten the rotor knives to final
Check the bed knives Gap adjustment tips Measure the knife gap
5