Sterling D48160s manual Check Daily Weekly Monthly, Periodic Maintenance Schedule

MAINTENANCE

SECTION 6-1

Periodic Maintenance

TABLE 1: PERIODIC MAINTENANCE SCHEDULE

CHECK	DAILY	WEEKLY	MONTHLY
Check tightness of upper chamber hold down handles.	X
Refer to Section 6, Cutting Chamber
Check tightness of screen chamber wedges. Refer to	X
Section 6, Screen Replacement
Check infeed flap position/condition. Refer to Section	X
6 Periodic Maintenance
Check interlock actuator switch screws	X
position/condition. Refer to Section 6 Screen
Replacement/Cutting Chamber Access
Do housekeeping around work area	X
		X
Check tightness of upper pivot arm screws. Refer to
Section 6 Periodic Maintenance		X
Check jackscrew travel adjustment – internal limit
switches and chamber mounting bracket limit switch.
Refer to Section 4, Setting And Adjusting
Chamber.Cradle3 Jackscrews		X
Check hydraulic assembly –limit switches, hoses,
pivot pins, brackets ensure they are tight Refer to
Section 4-36 Setting And Adjusting hydraulic opening.		X
Check the pivot pins and locknuts for the jackscrews to
ensure they are tight. Refer to Section 6 Periodic
Maintenance		X
Inspect overall condition of jackscrews. Refer to
Section 6 Periodic Maintenance		X
Check Zero Speed Sensor operation. Refer to Section
3, Installation-Test the Zero Speed Sensor		X
Check knife clearance and wear. Refer to Section 4,
Adjusting and Replacing the Rotor Knives.		X
Check that rotor and bed knife bolts have proper
torque. Refer to Section 4, Adjusting and Replacing
the Rotor Knives/Adjusting and Replacing the Bed
Knives.
Lubrication: More frequent lubrication may be			X
required, refer to Section 6, Lubrication and Periodic
maintenance
Belt tension. Refer to Section 4, Settings and			X
Adjustments

78