StorageTek 312564001 manual DB2 Manager User Guide

Explanation: The utility has been unable to obtain an DB2 Manager control region request element from ECSA storage, in order to pass a request to the control region. Execution of the utility is terminated with condition code 12.

Action: This can occur if more than 1024 concurrent migrated row storage and retrieval requests are active in the system. If this is the case, re- schedule the row migration job to avoid reaching this limit. If this is not the case, try stopping and re-starting the DB2 Manager control region, and re-submitting the job. If the problem still persists, contact your local STK support representative.

OTD10018 Timeout error occurred when acquiring the scheduler lock

Explanation: The utility has been unable to obtain exclusive access to the control region scheduler lock within a time interval of 1 minute. Execution of the utility is terminated with condition code 12.

Action: This condition may occur if the DB2 Manager control region is exceptionally busy. If this is the case, re-schedule the row migration job at a less busy time. If this is not the case, examine the control region job log for exceptional messages which may give more information about the abnormal condition. Contact your local STK support representative if the problem cannot be resolved.

OTD10019 Timeout error occurred while waiting on response from the control region.

Explanation: The utility has passed a request to the control region, but a response was not received within the timeout limit specified in the READTIMEOUT parameter in the ENVCNTL parameter library member. Execution of the utility is terminated with condition code 12.

Action: Examine the job log for the DB2 Manager control region to determine if any abnormal condition has occurred which prevented the control region from responding to the request. If no obvious reason for the timeout can be identified, contact your local STK support representative.

OTD10020 Return code xx, supp codes X'yyyyyyyy’ received during database OPEN COMMIT CLOSE processing.

Explanation: An error has been received from an Archive Manager open, commit or close request. ‘xx’ gives the return code and ‘yyyyyyyy’ the hexadecimal supplementary reason codes received from Archive Manager. Execution of the utility has been terminated with condition code 12.

Action: Refer to the Archive Manager User Manual for a description of the return and supplementary codes displayed in the message. Take the appropriate corrective action and re-submit the job. If no obvious

DB2 Manager User Guide	123
StorageTek Proprietary