StorageTek 312564001 manual OTD20091 Invalid Shutdown operands, OTD20093 Shutdown in progress

OTD20083 Task tnnn has not been purged – request ignored

Explanation: A FORCE request has been entered for task 'tnnn', where ‘t’ identifies the sub-task type (‘D’ – disk reader; ‘H’ – housekeeping; ‘S’ – scheduler; ‘T’ – tape reader; ‘W’ – writer) and ‘nnn’ gives the sub-task number, but no prior PURGE request has been entered. A PURGE request must already have been entered for a task before a FORCE request is accepted. The request is ignored.

Action: Enter a PURGE request for the task. All outstanding retrieval requests will be completed before the specified task is terminated. If necessary a FORCE request may then be entered for the task.

OTD20091 Invalid Shutdown operand(s)

Explanation: An invalid operand has been entered with the operator SHUTDOWN command.

Action: Re-enter the command, specifying a valid operand. Refer to page 62 for details of the operator SHUTDOWN command format.

OTD20092 Do you want to proceed with shutdown (y/n)?

Explanation: An operator SHUTDOWN request has been entered on the console via the operator reply facility. This message is displayed to ask for confirmation of the shutdown request.

Action: To proceed with DB2 Manager control region shutdown processing, enter 'Y'.

To abort the shutdown request, enter 'N'. The operator reply message OTD20000 will then be redisplayed.

OTD20093 Shutdown in progress

Explanation: An operator SHUTDOWN request has been entered and accepted. Termination of the control region will continue.

Action: None. This is an informational message only.

OTD20094 Error freeing communications table storage

Explanation: The storage area allocated in subpool 241 in the MVS ECSA during control region initialization processing for the DB2 Manager communications table was not freed successfully during control region shutdown. Termination processing continues.

Action: Refer to other available system messages for more information regarding the error. When the cause has been identified, take the appropriate corrective action to ensure that the error does not re- occur during future shutdown of the control region.

DB2 Manager User Guide	153
StorageTek Proprietary