StorageTek 312564001 manual OTD22004 Invalid request on Scheduler Queue

OTD22002 Scheduler initialization error: insufficient storage available for workareas

Explanation: A request for virtual storage in the DB2 Manager control region has been rejected by the operating system. Control region initialization processing is aborted.

Action: Allocate more virtual storage to the control region, by increasing the value of the SIZE parameter in the DB2 Manager procedure. Restart the control region.

OTD22003 Storage Release Error: Return Code=X'xx' T=Snnn

Explanation: An error has been received trying to free a virtual storage area during scheduler task shutdown processing. ‘xx’ gives the hexadecimal return code from the STORAGE macro, and ‘nnn’ identifies the scheduler task number. Shutdown processing will continue normally.

Action: Consult IBM documentation on the STORAGE macro for an explanation of the return code displayed in the message. If necessary, take appropriate action to ensure the problem does not re- occur. If the error persists, and no apparent cause can be identifier, report the problem to your local DB2 Manager support representative.

OTD22004 Invalid request on Scheduler Queue

Explanation: A request in the scheduler queue is not a valid DB2 Manager request element. Processing of the request cannot continue. The scheduler task will continue by waiting for the next request to arrive.

Action: This message indicates an internal error in DB2 Manager processing. Retain as much information about the error as possible and report the problem to your local DB2 Manager support representative.

OTD22005 ENQueue Error: Major: mmmmmmmm Minor: nnnnnnnnnnnnnnnn Return code=X'xx' T=Snnn

Explanation: An error has been received attempting to enqueue on the resource whose major and minor names are identified in the message. ‘xx’ is the return code received from the ENQ macro, and ‘nnn’ identifies the scheduler task receiving the error.

Action: Refer to IBM documentation on ENQ macro processing for a description of the return code. Take the appropriate corrective action and re-start the control region. If no apparent cause for the error can be detected, contact your DB2 Manager product support representative.

DB2 Manager User Guide	155
StorageTek Proprietary