StorageTek 312564001 manual OTD20007 Envcntl Tapecntl parameters successfully processed

OTD20007 ENVCNTL TAPECNTL parameters successfully processed

Explanation: Validation of parameters in the ENVCNTL or TAPECNTL member of the DB2 Manager parameter library has completed successfully. Control region initialization processing continues.

Action: None. This is an informational message.

OTD20008 ODCT GETMAIN failure x'xxxx'

Explanation: A request for virtual storage in subpool 241 of the MVS ECSA has been denied by the operating system with return code 'xx'. Initialization of the control region is aborted.

Action: Refer to IBM documentation on the GETMAIN macro for an explanation of the return code. Take the appropriate corrective action and restart the control region.

OTD20009 Communications table initialized

Explanation: The DB2 Manager communications table has been successfully initialized during control region initialization. Processing continues.

Action: None. This is an informational message.

OTD20010 Error X'xx' during initialization of task tnnn

Explanation: Error code 'xx' was returned by a sub-task during Archive Manager/OAM initialization processing. Control region initialization has been aborted. ‘t’ identifies the sub-task type (‘D’ – disk reader; ‘H’ – housekeeping; ‘S’ – scheduler; ‘T’ – tape reader; ‘W’ – writer) and ‘nnn’ gives the sub-task number.

Action: Consult other messages displayed during control region initialization for a description of the sub-task error. Take the action specified for the error message, and restart the control region.

If the cause of the error is not apparent from any displayed message, contact your DB2 Manager product support representative.

OTD20011 Timeout error during initialization of task tnnn

Explanation: A control region sub-task has not responded with one minute during initialization processing. Initialization of the control region has been aborted. ‘t’ identifies the sub-task type (‘D’ – disk reader; ‘H’ – housekeeping; ‘S’ – scheduler; ‘T’ – tape reader; ‘W’ – writer) and ‘nnn’ gives the sub-task number.

Action: Consult other messages displayed during control region initialization for possible information as to why the sub-task is not responding. Take the action specified for the error message, and restart the control region.

142	DB2 Manager User Guide
	StorageTek Proprietary