StorageTek 312564001 manual OTD20071 Invalid Purge operands – request ignored

OTD20071 Invalid Purge operand(s) – request ignored

Explanation: An invalid operand has been entered with the PURGE operator command.

Action: Ensure that the PURGE command is specified correctly and re-enter the command. Refer to page 55 for details of the operator PURGE command.

OTD20072 Task tnnn is already being purged – request ignored

Explanation: A second PURGE request has been entered for a busy sub-task before the first PURGE request has been processed, where ‘t’ identifies the sub-task type (‘D’ – disk reader; ‘H’ – housekeeping; ‘S’

–scheduler; ‘T’ – tape reader; ‘W’ – writer) and ‘nnn’ gives the sub- task number.. The request is ignored.

Action: Wait for the queued PURGE command to be processed after all outstanding retrieval requests have been completed. To immediately terminate the sub-task, enter the FORCE command.

OTD20073 Task tnnn purge request is being processed

Explanation: A PURGE request has been queued for a sub-task, where ‘t’ identifies the sub-task type (‘D’ – disk reader; ‘H’ – housekeeping; ‘S’ – scheduler; ‘T’ – tape reader; ‘W’ – writer) and ‘nnn’ gives the sub-task number. Waiting tasks will terminate immediately; busy tasks will terminate when all currently queued requests have been processed.

Action: None this is an informational message.

OTD20081 Invalid Force operand(s) – request ignored

Explanation: An invalid operand has been entered with the FORCE operator command.

Action: Ensure that the FORCE command is specified correctly and re-enter the command. Refer to section 0 on page 4.55 for details of the FORCE operator command format.

OTD20082 Controller received error posting requestor ECB

Explanation: An error occurred posting an outstanding request during force purge processing. The DB2 Manager control region will attempt to recover from this error condition and continue processing.

Action: Consult other available system messages for additional information regarding the error. If no apparent cause for the failure can be determined, report the problem to your DB2 Manager product support representative. Preserve all diagnostic information and system dumps for further analysis.

152	DB2 Manager User Guide
	StorageTek Proprietary