StorageTek 312564001 manual Maxsched, Maxqlen, Retaintape, Tapewait, Objsize

		If the value of MAXTWTR is to be increased, DB2 Manager
		will increase the number of initialized writer tasks, by
		restarting terminated tasks, and/or adding new tasks.
		If the value of MAXTWTR is to be decreased, DB2
		Manager will terminate a number of existing writer tasks
		equal to the decrease in the value of MAXTWTR. These
		tasks will appear with the status TERM in any subsequent
		status display, and will not be available for object recall
		processing.
		Note that processing of this command may take a little
		time for significant changes in the value of MAXTWTR.
	MAXSCHED -	DB2 Manager will alter the current setting of the
		MAXSCHED parameter to the value specified in the SET
		command. The value ‘nnn’ must be a 1-3 digit numeric
		value in the range 1-255.
		If the value of MAXSCHED is to be increased, DB2
		Manager will increase the number of initialized tape reader
		tasks, by restarting terminated tasks, and/or adding new
		tasks.
		If the value of MAXSCHED is to be decreased, DB2
		Manager will terminate a number of existing tasks equal to
		the decrease in the value of MAXSCHED. These tasks will
		appear with the status TERM in any subsequent status
		display, and will not be available for object recall
		processing.
		Note that processing of this command may take a little
		time for significant changes in the value of MAXSCHED.
	MAXQLEN -	DB2 Manager will alter the current setting of the
		MAXQLEN parameter to the value specified in the SET
		command. ‘nnn’ must be a 1-3 digit numeric value in the
		range 1-256.
	RETAINTAPE -	DB2 Manager will alter the current setting of the
		RETAINTAPE parameter to the value specified in the SET
		command. ‘nnnn’ must be a 1-4 digit numeric value in the
		range 0-1440.This change will take immediate effect.
	TAPEWAIT -	DB2 Manager will alter the current setting of the
		TAPEWAIT parameter to the value specified in the SET
		command. ‘nnnn’ must be a 1-4 digit numeric value in the
		range 0-1440. This change will take immediate effect.
	OBJSIZE -	DB2 Manager will alter the current setting of the OBJSIZE
		parameter to the value specified in the SET command.
		‘nnnnn’ must be a 1-5 digit numeric value in the range 1-
60	DB2 Manager User Guide
	StorageTek Proprietary