StorageTek 312564001 manual OTD140xx - table analysis utility messages

Explanation: Identification of objects to be pre-fetch by Archive Manager cannot be performed via index-only processing, and a SQLIN parameter of INDEXONLY=Y has been specified (or defaulted). Execution of the utility cannot continue, and is terminated with a condition code 12.

Action: Refer to a description of the INDEXONLY execution parameter on page 101 for a discussion of considerations regarding index-only processing by the row restore utility. If necessary, change the setting of the INDEXONLY parameter and re-submit the job.

OTD13015 Archive Manager is not at the correct level

Explanation: Archive Manager v2.6 or higher must be installed in order to be able to perform pre-fetch processing using the DB2 Manager pre-fetch utility. The version of Archive Manager used during execution of the utility is not at the correct level.

Action: Ensure that the correct Archive Manager load library has been specified in the STEPLIB, JOBLIB or linklist library concatenations, and rerun the job.

OTD13016 Return Code xx, Supp codes X'yyyyyyyy' received during OPEN CLOSE processing for Archive Manager database zzzz

Explanation: An error has been received from an Archive Manager open or close request. ‘xx’ gives the return code and ‘yyyyyyyy’ the hexadecimal supplementary reason codes received from Archive Manager.

Execution of the utility has been terminated with condition code 12.

Action: Refer to the Archive Manager User Manual for a description of the return and supplementary codes displayed in the message. Take the appropriate corrective action and re-submit the job. If no obvious reason for the error can be identified, contact your local STK support representative.

OTD140xx – table analysis utility messages

Messages from the DB2 Manager table analysis utility will be written to the SYSPRINT dataset.

OTD14000 Table Analysis Utility ended with completion code xx

Explanation: The DB2 Manager table analysis utility has terminated. ‘xx’ gives the job completion code. This can take the following values:

0 - the utility has been executed successfully.

4 - a warning condition has been encountered during processing of the utility. A warning message will have been written to the

132	DB2 Manager User Guide
	StorageTek Proprietary