StorageTek 312564001 manual Restart=Yesno

to character position 71 of the record. Individual keyword parameters may not be continued over more than one record.

An asterisk ('*') in character position 1 will indicate a comment record, which will be ignored for parameter validation processing.

The following parameters may be specified:

•LCDDBID = xxxx

This is a mandatory parameter and specifies the 4-character identifier of the Archive Manager database to which rows are to be archived during execution of the utility. This database must have been identified in the JCL used to start the DB2 Manager control region (see “Control region initialization” on page 44). This value is used to identify the Archive Manager database in all DB2 Manager components.

The utility will verify that the Archive Manager database contains only migrated rows from the DB2 table being processed in its current execution. If this is not the case, an error report is produced and the utility will terminate with condition code 12.

•COMMIT = nnnnn

This is an optional parameter used to specify the frequency at which Archive Manager and DB2 commit processing is to be performed by the utility. ‘nnnn’ is a 1-5 digit numeric value in the range 1-65535, specifying the number of rows to be processed between each commit request. If this parameter is omitted, a default value of 1000 is used.

Once commit processing has been successfully completed, all rows migrated since the last commit point (or since the beginning of the job, for the first commit call) will have been successfully stored in the Archive Manager database, and all subsequent access to those rows will be performed by DB2 Manager.

The value specified (or defaulted) for the COMMIT parameter will also be used in conjunction with the global OBJSIZE parameter (specified in the ENVCNTL parameter library member) to determine the number of rows to be stored per object in the Archive Manager database. The actual number of rows per objects will be the lower of the two values (COMMIT or OBJSIZE).

•RESTART=YESNO

This is an optional parameter used to control restart processing. If the previous execution of the utility terminated abnormally, the parameter should be set to “YES”. If omitted, the default value of “NO” is used.

Failure to specify this parameter correctly may cause execution of the utility to fail with an Archive Manager connect database return code of ‘15’, indicating that the utility is attempting normal connection to a database which is in an “uncommitted” condition.

DB2 Manager User Guide	83
StorageTek Proprietary