152 TASCAM GigaEditor 4 Manual
Decay 2 Time (sec)
e Decay 2 Time is measured in seconds (0.000-60.000) or is set to “Innite” which overrides the time
setting.
is parameter determines how long the Sustain section of the envelope will last. A Decay 2 Time will
cause the sample level to sustain for that amount of time and then go into the release, even without letting
go of the note. Ch ecking the “In nite” check bo x will cause t he sample level to sustain inde nitely until
you release the not e.
Release time (sec)
e Release Time is measured in seconds (0.000-60.000).
is parameter determines how long it will take for the sample volume to ramp down depending on how
Decay 2 is set.
If the Decay 2 is set to “Innite”, the release will kick in whe n the note is released.
If the Decay 2 is set to a speci c amount of time, then th e release will kick in a er that amount of time or
when you release the note, whichever comes rst.
e Modulation settings allow real-time MIDI control of the Attack, Decay and Release of the Amplitude
and Filter Envelopes.
Modulation source
Choose the MIDI co ntroller to use from the list of standard MIDI co ntrollers.
Modulation invert
Reverses the actio n of the MIDI co ntroller when set to “Yes”.
Attack/Decay/Release modulation depth
e response of th ese individual param eters is set here.