Tascam 4 - page 90

90 TASCAM GigaEditor 4 Manual
2. Start the Instrument Wi zard and go to Step 2.
3. is time select the “Make a region per sample” option. is will allow us to see how the samples are
mapped and stretched out.
4. Set the Start and End notes to C1 and B2. ere are only a few samples included with the bass
ensemble tutorial samples so this is a good range that will als o stretch the top and bottom notes a bit.
Press Next to move on to Step 3 of t he Instrument W izard.
5. Set the rst Controller Source to Velocity and give it 2 splits. Name it “Velocity Splits” in the
Description eld.
6. Set the second controller to “Keyboa rd” and give it 8 splits. Name it “Keyswitch” in the Description
eld.
7. Click on the Split Names button for the Velocity dimension, and
name the splits as shown.
Click OK when nished.
8. Click on the Split Names button for the Keyswitch dimension, and name the splits as shown. ese
are named for each type of articulation. Click OK when nished.