56 TASCAM GigaEditor 4 Manual
11. Now select the Loud layer dimensio n only, and cha nge the “Attenuat ion controller i nvert” paramet er
to “Yes”. is will reverse the eect of the Mod Wheel on the Loud layer’s volume, creating a simple
crossfade between the loud and so layers. As the Mod Wheel moves from 0 to 127, the so layer
will fade out and th e loud layer will fade in.
12. Save the instrument and load it to a MIDI
channel.
13. Hold down the Note E2 while moving the Mod-Wheel back and forth. You should hear a smooth
cross-fade between the so and loud layer.
You can also do custom in and out points using the Crossfade Editor. is tool can handle any number of
layers. When you use this method, leave the “Control invert” parameter set to “No” for all layers. e
crossfade is dened instead by a set of four parameters:
Crossfade in start
Crossfade in nish
Crossfade out start
Crossfade out nish
Typically each layer will have its own set of fade points, coordinated with those of the other layers. e
Crossfade Editor allows the cross fades for all layers to be visu alized and edited graphically . In the example
below, Layer 1 will gradually fade t o Layer 2 as the Mod Wh eel rises through the middl e part of its range.
Up to 128 layers are supported.