Tektronix AM700 CMODe Subsystem (SOUNd and DAUDio)

CMODe Subsystem (SOUNd and DAUDio)
3–48 AM700 Audio Measurement Set Programmer Manual
CMODe Subsystem (SOUNd and DAUDio)
Usage: The CMODe commands found here are used for setting the digital audio sample
rate clock source and turning off Sound and selecting the Sound source.
CMODe:DAUDio:SRATe:SOURce CSTatus|CLOCk
Usage: Selects the users preference for determination of audio sampling rate on input
digital audio signals. Digital audio has a sample rate embedded in its channel
status block, but can be sent on the interface at a different sampling rate. When
this audio is received with the indicated (cstatus) rate different from the
interface clock frequency, this command allows the user to tell which to
believe.
*RST: *rst value is CSTatus. The indicated cstatus rate is believed.
NOTE. One of the sample rates allowed in AES3 is ”not indicated.” If the
user prefers CSTatus mode and the receive channel status is ”not
indicated,” the interface clock frequency will be used; but the setting of
this command is not changed.
CMODe:SOUNd:STATe ON|OFF
Usage: Turns listen on/off (same as front panel Sound button).
Query: CMOD:SOUN:STAT?
*RST: Sets Sound State off.
CMODe:SOUNd:SOURce ANALog|DIGital
Usage: Select what is listened to, the analog signal or the digital signal (a selection in
the Sound menu).
Query: CMOD:SOUN:SOUR?
*RST: Sets Sound Source to Analog.