STATus Subsystem
AM700 Audio Measurement Set Programmer Manual 3–143
STATus:PRESet
Usage: Configure the SCPI and device-dependent status data registers so that
device-dependent events are reported at a higher level through the mandatory
part of the status-reporting system. Device dependent events are summarized in
the mandatory structures as defined in part by IEEE 488.2. SCPI-required
structures make of the rest of the mandatory reporting system.
The PREset command affects only the enable register, the transition filter
registers, and queue enabling for the SCPI-mandated and device-dependent
status data mechanisms. The Status Byte and Standard Event Status are not
affected by PREset. PREset does not clear any of the event registers or any item
from the error/event queue. Those are cleared by the *CLS command.
PREset sets the device-dependent enable register to all 1’s; transition filters are
set to a device-dependent state (PTR, NTR, or both).
STATus:PRESet enables errors and disables all other events. The summary of
the queue is reported in bit 2 of the Status Byte register.
Query: No query, this is an event.
STATus:QUEue[:NEXT]?
Usage: Returns the next queued error report from the human readable status register.
Query: Query only.
STATus:QUEue:ENABle <parameter>
Usage: Enables the Error Queue list.
Parameters: The parameter may be a decimal number, or it may be sent as a non-decimal
numeric mask.
Query: STAT:QUE:ENAB?