DISPlay Subsystem
3–54 AM700 Audio Measurement Set Programmer Manual
DISPlay:MENU:CLEar[:IMMediate]
Usage: Command only. Clears menus, dialog boxes, and notifiers from the display.
DISPlay[:WINDow[1–4]]:CURSor[:POSition[1|2]]
<x-axis_value>
Usage: Sets the cursor position of the designated cursor in the designated window to a
given x-axis value. The x-axis scaling is application specific.
Range: 0 to maximum x-axis value in display.
Query: DISPlay[:WINDow[1–4]]:CURSor[:POSition[1|2]]?
*RST: Sets cursor positions to about 1/4 and 3/4 the x-axis scale total range except in
the monitor application. There both cursors are set to 1 second.
DISPlay[:WINDow[1–4]]:CURSor:CONStrain <Boolean>
Usage: Constrains cursors to valid trace data points (both real and interpolated) when
set to 1. When set to 0, cursors may be positioned to areas of the views that do
not have trace data. (This is the Snap to Data choice in the cursor menu.)
Query: DISPlay[:WINDow[1–4]]:CURSor:CONStrain? returns 1 for ON or 0
for OFF.
*RST: Sets CONStrain to off.
DISPlay[:WINDow]:CURSor:STATe <Boolean>
Usage: Used to turn cursors on and off globally in all windows of an application.
Query: DISP:WIND:CURS:STAT?
*RST: Turns cursor state off.