Getting Started
1–28 AM700 Audio Measurement Set Programmer Manual
The AMEasure subsystem provide commands that set up the AM700 to perform
selected measurements and to control some parameter settings of applications. The
commands are application specific. The majority of the AMEasure commands are
used for the Audio Analyzer application. These commands include those used to
control settling time, command regulation mode, and select the measurements to be
done by the Audio Analyzer.
Suffixes: AME1 MEAS 1
AME2 MEAS 2
AME3 MEAS 3
AME4 MEAS 4
FFT and the AMEasure Subsystem. FFT supports 5 separate measurements. They
are as follows:
AMEasure1: FFT on channel 1
AMEasure2: FFT on channel 2
AMEasure3: Configurable Multitone
AMEasure4: Configurable Multitone
AMEasure5: Configurable Multitone
These measurements ‘assignments are described by the the AME:MODE command.
FFT implements AME:MODE, with the following initial values for each suffix
combination:
AME1:MODE FFT
AME2:MODE FFT
AME3:MODE MTONe
AME4:MODE MTONe
AME5:MODE MTONe
The trace subsystem contains measurement results for display and remote query.
Trace queries are used to return the measurement data held in a trace. Different
AMEasure
Subsystem
TRACe
Subsystem