STATus:OPERation:INSTrument Registers

3–148 AM700 Audio Measurement Set Programmer Manual
STATus:OPERation:INSTrument[:EVENt]?
Usage: Returns the content of the OPERation:INSTrument:EVENt register. Reading the
register clears it.
Query: Query only.
STATus:OPERation:INSTrument:CONDition?
Usage: Returns the content of the OPERation:INSTrument:CONDition register.
Reading the register clears it.
Query: Query only.
STATus:OPERation:INSTrument:ENABle <numeric_value>
Usage: Sets the enable mask to allow true conditions in the OPERation:INSTrument
register to be reported in the summary bit. If a bit is 1 in the enable register and
its associated event bit transitions to true, a positive transition will occur in the
associated summary bit.
Range: 0 to 32767 where the numeric_value represents the decimal value of the 16
register bits. The value of 32767 is 215 for all 16 register bits (0 through 15) are
set to 1.
Query: Returns the status of the OPERation:INSTrument:ENABle register as an <nr1>
value representing the bit states of the OPERation:INSTrument register bits.
STATus:OPERation:INSTrument:PTRansition <numeric_value>
Usage: Sets the positive transition filter. Setting a bit in the positive transition filter
causes a 0 to 1 transition in the corresponding bit of the associated condition
register to cause a 1 to be written in the associated bit of the corresponding
event register.