SENSe Subsystem
3–106 AM700 Audio Measurement Set Programmer Manual
NOTE. This value is only updated when measurements are being made on
the digital input. This usually means that the digital generator must be in
AES mode and CSTReam1 or CSTREAM2 is fed with SENSE5 or
SENSe6.
Query: SENSe(5|7):DAUDio:INTerface:FREQuency? returns the digital
interface clocking frequency. For example, 48000.1
SENSe5:DAUDio:INTerface:FREQuency:RATio?
Usage: Query only. Used to determine the ratio of sampling rates of the main digital
input with respect to the reference input
Query: SENS5:DAUD:INT:FREQ:RAT? returns the frequency ratio in percent. For
example, 100.0
SENSe11:DAUDio:INTerface:JSPectrum:EQualization <Boolean>
Usage: Set or query whether automatic equalization is performed on the digital
interface during jitter spectrum measurements.
Parameters: ON or 1 to engage the equalization, OFF or 0 to bypass
Query: SENS11:DAUD:INT:JPS:EQ? returns 1 if equalization is on or 0 if off.
*RST: Set equalization to OFF
SENSe5:DAUDio:INTerface:PHASe:DIFFerence?
Usage: Query only. Used to determine the digital interface phase difference between
the main and reference inputs.
Query: SENS5:DAUD:INT:PHAS:DIFF? returns the phase difference between the
main and the reference signal in degrees.