Getting Started
AM700 Audio Measurement Set Programmer Manual 1–21
signals, the routing commands take on suffixes and channel_list numbers to provide
the control needed. Figure 1–10 illustrates the selection paths available in the
AM700.
The ROUTe Subsystem commands are used for switching signals in the input. No
processing is done. To use the ROUTe commands, selectable routes must have a
numerical assignments.
In the AM700 the route and close suffix numbers are as follows:
CLOSe <channel_list> indices:
1 Analog input channel A
2 Analog input channel B
3 Analog generator channel A
4 Analog generator channel B
6 Balanced (FP) digital audio
7 Unbalanced (RP) digital audio
8 Optical (RP) digital audio
9 AES Generator
ROUTe suffixes:
1 Analog acquisition channel A
2 Analog acquisition channel B
3 AES/EBU digital audio
ROUTe
Subsystem