Tektronix AM700 ROUTe[13]:CLOSe:STATe?

ROUTe Subsystem
AM700 Audio Measurement Set Programmer Manual 3–103
You must use a valid channel number (see Parameters) for the designated route to
get a return. When the query is correctly stated, the command returns 0 for open and
1 for closed.
Example: rout1:clos? 1
returns 1 or 0 for closed or open.
rout3:clos? 6
returns 1 or 0 for closed or open.
*RST: Sets ROUT1:CLOS 1, ROUT2:CLOS 2, and ROUT3:CLOS 6.
ROUTe[1–3]:CLOSe:STATe?
Query: ROUTe:CLOSe:STATe? <numeric_value> returns the number of the
closed route (selected input connector).
*RST: Sets the ROUTe state to closed (see above).