Coupled
Commands:
SOURce:FUNCtion Subsystem
3–116 AM700 Audio Measurement Set Programmer Manual
SOURce[1–8]:FUNCtion:SHAPe <signal_name>
Default: The last selected signal type is generated unless the AM700 has been reset. The
reset default is a sinusoidal CW signal of 1 kHz at 0 dBu.
Parameters: <SINusoid|JSINe|TBURst|SIMD|CIMD|SNOise
|PCHirp|POLarity|TPOlarity|USER|MTONe>
Query: SOURce:FUNCtion? returns the shape, frequency, and amplitude of the output
signal.
SOURce:FREQuency
SOURce:VOLTage
*RST: At *RST the shape is a sinusoid CW signal of 1 kHz at 0 dBu.
SOURce:FUNCtion:SHAPe SINusoid
Usage: This command generates a single sine-wave tone with variable amplitude and
frequency. The sine-wave frequency is set by the SOURce:FREQuen-
cy[:CW|FIX] <numeric_value> command, and the sine-wave amplitude is set
by the SOURce:VOLTage[:LEVel][:IMMediate][:AMPlitude]
<numeric_value> command. In addition, the front panel signal generator
AMPLITUDE and FREQUENCY knobs have direct control of the signal
amplitude and frequency of the assigned generator.
Query: SOURce:FUNCtion:SHAPe? returns the current test signal selection.
Example: SOUR:VOLT 3;FREQ[:CW] 2000;FUNC:SHAP SIN
The parameters for amplitude and frequency may be entered separately to change
either of those items via remote control. For the assigned generator these parameters
are also controlled by the front panel AMPLITUDE and FREQUENCY controls.
Example: SOUR:VOLT 4
SOUR:FREQ 3000