Tektronix AM700 SOURce:TBURst:PERiod <numeric_value>, SOURce:TBURst:WIDTh <numeric_value>

SOURce:FUNCtion Subsystem
AM700 Audio Measurement Set Programmer Manual 3–119
Example: sour:volt 4
sour:freq 3000
sour:burs:per 5
sour:burs:wid 5e–1
SOURce:TBURst:PERiod <numeric_value>
Usage: PERiod is an integer containing the number of cycles until burst repeats (i.e.:
off time = period – width). PERiod is constrained to be greater than WIDTh.
The generator converts the width-time parameter into the nearest number of
cycles of sine wave to generate.
Range: 64 to 100064
Resolution: 1
Units: Cycles
Query: SOUR[1–8]:TBUR:PER?
*RST: 128
SOURce:TBURst:WIDTh <numeric_value>
Usage: WIDTh is an integer containing the number of cycles of the burst. The
generator converts the width-time parameter into the nearest number of cycles
of sine wave to generate.
The number of cycles are always cycles of sine wave frequency
SOUR:FREQ:CW, therefore, the actual time of burst on/off are frequency
dependent.
Range: 10 to 100000
Resolution: 1
Units: Cycles
Query: SOUR[1–8]:TBUR:WID?