AM700 SCPI Commands
3–2 AM700 Audio Measurement Set Programmer Manual
Required Commands
The following commands are required in all SCPI instruments:

Table 3–2: SCPI required commands

Mnemonic Command description section
(SCPI Std) Syntax and style section
(SCPI Std)
:SYSTem
:ERRor? 19.7
:VERSion? 19.16 1991
:STATus 18 5
:OPERation
[:EVENt]?
:CONDition?
:ENABle
:ENABle?
:QUEStionable
[:EVENt]?
:CONDition?
:ENABle
:ENABle?
:PRESet
Optional Commands
All other commands in the SCPI “Command Descriptions” are considered optional
in that they depend on the capabilities of the SCPI instrument. Commands that are
used will be implemented exactly as specified by using the SCPI defined com-
mands. Certain commands, if used, require that other commands also be implement-
ed. If a command is implemented where the instrument will not support all the SCPI