AMEasure Subsystem (Audio Analyzer)
AM700 Audio Measurement Set Programmer Manual 3–7
AMEasure Subsystem
The AMEasure subsystem provide commands that quickly set up the AM700 to
perform selected measurements and to control some parameter settings of
applications. The commands are application specific and are divided as such to
make them easier to locate by application. The majority of the AMEasure
commands are used for the Audio Analyzer application.

AMEasure[1–4]:STATe <Boolean>

Parameters: ON|OFF and 1|0
Usage: Enables the AMEasurement for the designated AME.
Suffixes: AME1 MEAS 1
AME2 MEAS 2
AME3 MEAS 3
AME4 MEAS 4
Query: AME[1–4]:STAT? returns 0 for off or 1 for on for the designated AME.
*RST: AME[1–4] State ON

AMEasure[1–4]:HISTory <numeric_value>

Parameters: 0 to 4
Usage: Sets the number of traces to be held as history in a display. 0 is no history, and
only the current trace is displayed. A setting of 4 hold four traces as history.
Acquiring another trace past four deletes the oldest trace.
Query: AME[1–4]:HIST? returns the current History setting for the designated AME.
*RST: Sets HISTory to 0.