SENSe Subsystem

AM700 Audio Measurement Set Programmer Manual 3–105
Parameters: MED for 120 Hz
HIGH for 1200 Hz
The LF REJ filter is always engaged for SENSe11.
*RST: MED
SENSe11:DAUDio:INTerface:JGAin NORMal|HIGH
Usage: Set or query the gain used in the eye/jitter detection circuitry.
Parameters: NORMal is X1 gain
HIGH is X8 gain
Query: SENS11:DAUD:INT:JGA? returns NORMAL or HIGH.
*RST: NORMAL
SENSe5:DAUDio:INTerface:CORRection:EQualization?
Usage: Query only. Indicates the amount of equalization applied by automatic
equalization circuitry.
Query: SENS5:DAUD:INT:CORR:EQ? Returns the equalization value in dB.
The automatic equalization circuit is always engaged, except when measuring the
jitter spectrum, in which case the equalization state follows SENSe11:DAU-
Dio:INTerface:JSPectrum:EQualization.
SENSe(5|7):DAUDio:INTerface:FREQuency?
Usage: Query only. Used to determine the digital interface clocking frequency.