DISPlay Subsystem
AM700 Audio Measurement Set Programmer Manual 3–65
DISPlay:WINDow[5|16]:TRACe[1–16]:Y:AXIS:UNIT <unit_type>
Usage: Used to set the y-axis units of the specified trace in the anayzer real-time
measurement traces (WIND5) or the generator (WIND60).
Suffixes: The TRACe suffixes for the y-axis are the same as for the x-axis.
DISPlay[:WINDow[1–4]]:TRACe[1|2]:Y[:SCALe]:AUTO ONCE
Usage: This command scales the y-axis of the designated trace to display the full
amplitude of the trace data vertically.
DISPlay[:WINDow[1–4]]:TRACe[1|2]:Y[:SCALe]:BOTTom
<numeric_value>
Usage: Sets or queries the value represented by the minimum (bottom) edge of the
display. The value may be bounded by the range of the data.
Query: DISP:WIND2:TRAC1:Y:SCAL:BOTT? returns the value of the bottom of
the y-axis scale of trace 1 in window 2.
*RST: Set BOTTom to the minimum value for the appliation.
DISPlay[:WINDow[1–4]]:TRACe[1|2]:Y[:SCALe]:CENTer
<numeric_value>
Usage: Sets or queries the value represented by the center point of the y-axis. This
value may be bounded by the range of the data. When a new CENTer value is
entered, the division values remain the same but the TOP and BOTTom values
change.
Query: DISP:WIND3:TRAC1:Y:SCALe:CENT? returns the value of the center
point of the y-axis scaling.
*RST: Sets to the midpoint of the scale.