TRACe Subsystem
3–178 AM700 Audio Measurement Set Programmer Manual
The units of the returned data pairs depend on the measurement setup in the
view. The possible choices are: Frequency, Level, THD, THD+N, IMD, Phase
Diff, Separation, Crosstalk + Noise, and Level Difference versus either
Frequency or Level. The default units for the traces follow those of the
real-time measurements units.
AME1_1 Depends on measurement
AME1_2 Depends on measurement
AME1_3 Depends on measurement
AME1_4 Depends on measurement
AME1_5 Depends on measurement
AME1_6 Depends on measurement
AME1_REF Depends on measurement
AME2_1 through AME4_REF are the same as AME1, but for
views 2 through 4
Audio Analyzer Real Time Measurement
CROS dB
FREQ1 Hz
FREQ2 Hz
IMD1 %
IMD2 %
LDIF dB
LEV1 Volts
LEV2 Volts
PHAS degree
SEP dB
THD1 %
THD2 %
THDN1 %
THDN2 %
WOW1 %
WOW2 %