HCOPy Subsystem
AM700 Audio Measurement Set Programmer Manual 3–73
Query: hcop:dest? returns the current setting for the hardcopy destination.
Default: The power up default is SYST:COMM:SER (serial port 1).
*RST: Sets the copy destination to an empty string.
HCOPy:DEVice:COLor <Boolean>
Usage: Sets or queries the state of the color output for PostScript and TIFF formatted
files. When set to ON, printer output will be color formatted. If other formats
than PostScript or TIFF or used, the COLor state is ignored, and the file is
output as monochrome (gray scale) only.
Query: HCOP:DEV:COL? returns 0 for off and 1 for on.
*RST: Sets COLor to off.
HCOPy:DEVice:INVert <Boolean>
Usage: Inverts the gray scale hardcopy if set.
Query: HCOP:DEV:INV? returns 0 for off and 1 for on.
*RST: Not changed by *RST. Default setting is 0 (off).
HCOPy:DEVice:LANGuage PCL|POSTscript|ELQuality|TIFF|INTer-leaf
Usage: This command allows the hardcopy format to be specified. We support the
following formats:
Parameters: PCL HPs Printer control language. Good for HP DeskJet and HP
LaserJet.
POSTscript A 300K output file is spooled even when the output device
is PostScript. At 9600 baud, this will take about 5 minutes to emit.
This format may be output in color, depending on the setting of
HCOP:DEV:COL.