Tektronix AM700 SOURce:LIST Subsystem

SOURce:LIST Subsystem
3–128 AM700 Audio Measurement Set Programmer Manual
SOURce:LIST Subsystem
Usage: Commands in the SOURce:LIST subsystem permit defining voltage and
frequency points and dwell time per point to be used for generating a signal
from a LIST. When the generator is set to Multitone, the list of frequencies is
looked at to produce the multitone output signal. The default is that all sources
use the same list, but a separate list may be entered for each source if separate
signals are selected (B does not follow A). Each suffix is a different generator.
Suffixes: SOURce1 Analog generator HR A
SOURce2 Analog generator HR B
SOURce3 Analog generator HB A
SOURce4 Analog generator HB B
SOURce5 Digital generator DSF 1
SOURce6 Digital generator DSF 2
SOURce7 Digital Signal Processor A
SOURce8 Digital Signal Processor B
SOURce[1–8]:LIST:DIRection:FORward|BACKward
Usage: Sets the direction of usage of the contents of a sweep list for the designated
source. FORward means from the first to the last setting in the list, and
BACKward means from the last to the first setting in a sweep list. UP and
DOWN are accepted, but are only alias for FOR and BACK, not the frequency
order.
Query: SOUR(1 – 8):LIST:DIR? returns the direction that the contents of a sweep list
will be read for the designated source.