Tektronix AM700 AMEasure[14]:SWEep:DIRection RISing|FALLing, AMEasure[14]:SWEep:FREQuency:DELta <numeric_value>, AMEasure[14]:SWEep:LEVel:DELta <numeric_value>

AMEasure Subsystem (Audio Analyzer)
AM700 Audio Measurement Set Programmer Manual 3–23
AMEasure[1–4]:SWEep:DIRection RISing|FALLing
Usage: Sets or queries the direction of the sweep being looked for by the AM700.
Query: AME[1–4]:SWE:DIR? returns RISING or FALLING for the setting of sweep
recognition for the designated AME.
*RST: Sets sweep detection to Falling sweeps.
AMEasure[1–4]:SWEep:FREQuency:DELta <numeric_value>
Usage: Sets or queries the amount of frequency change to use to determine that a
frequency sweep is occurring.
Range: 0 to 500 Hz
Query: AME[1–4]:SWE:FREQ:DEL? returns the numeric value in Hz or kHz
depending on the setting of UNIT:FREQ Hz|kHz for the designated
measurement.
*RST: Sets Delta to 500 Hz.
AMEasure[1–4]:SWEep:LEVel:DELta <numeric_value>
Usage: Sets or queries the amount of Amplitude change to use to determine that a
voltage sweep is occurring.
Range: 0.00 to 173.62 V
0.00 to 17300.00 mV
–97.7816 to 47.014 dBu
–100.00 to 44.7920 dBV
Units: Units of the parameter accepted by the AM700 or reported back by the AM700
depend on the setting of UNIT:VOLT V|mV|dBu|dBV|dBFS.