
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com | SPRS230L |
Digital Signal Processors
Check for
Samples: TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, TMS320C2802, TMS320C2801, TMS320F28016,
TMS320F28015
1 F280x, F2801x, C280x DSPs
1.1Features
•
–100 MHz
–60 MHz
–
•JTAG Boundary Scan Support (1)
•
–16 x 16 and 32 x 32 MAC Operations
–16 x 16 Dual MAC
–Harvard Bus Architecture
–Atomic Operations
–Fast Interrupt Response and Processing
–Unified Memory Programming Model
–
•
–F2809: 128K x 16 Flash, 18K x 16 SARAM
F2808: 64K x 16 Flash, 18K x 16 SARAM
F2806: 32K x 16 Flash, 10K x 16 SARAM
F2802: 32K x 16 Flash, 6K x 16 SARAM
F2801: 16K x 16 Flash, 6K x 16 SARAM
F2801x: 16K x 16 Flash, 6K x 16 SARAM
–1K x 16 OTP ROM (Flash Devices Only)
–C2802: 32K x 16 ROM, 6K x 16 SARAM
C2801: 16K x 16 ROM, 6K x 16 SARAM
•Boot ROM (4K x 16)
–With Software Boot Modes (via SCI, SPI, CAN, I2C, and Parallel I/O)
–Standard Math Tables
•Clock and System Control
–Dynamic PLL Ratio Changes Supported
–
–Watchdog Timer Module
•Any GPIO A Pin Can Be Connected to One of the Three External Core Interrupts
•Peripheral Interrupt Expansion (PIE) Block That Supports All 43 Peripheral Interrupts
•
–Protects Flash/OTP/L0/L1 Blocks
(1)IEEE Standard
–Prevents Firmware Reverse Engineering
•Three
•Enhanced Control Peripherals
–Up to 16 PWM Outputs
–Up to 6 HRPWM Outputs With 150 ps MEP Resolution
–Up to Four Capture Inputs
–Up to Two Quadrature Encoder Interfaces
–Up to Six
•Serial Port Peripherals
–Up to 4 SPI Modules
–Up to 2 SCI (UART) Modules
–Up to 2 CAN Modules
–One
•
–2 x 8 Channel Input Multiplexer
–Two
–Single/Simultaneous Conversions
–Fast Conversion Rate:
80 ns - 12.5 MSPS (F2809 only)
160 ns - 6.25 MSPS (280x)
267 ns - 3.75 MSPS (F2801x)
–Internal or External Reference
•Up to 35 Individually Programmable, Multiplexed GPIO Pins With Input Filtering
•Advanced Emulation Features
–Analysis and Breakpoint Functions
–
•Development Support Includes
–ANSI C/C++ Compiler/Assembler/Linker
–Code Composer Studio™ IDE
–DSP/BIOS™
–Digital Motor Control and Digital Power Software Libraries
•
–IDLE, STANDBY, HALT Modes Supported
–Disable Individual Peripheral Clocks
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Code Composer Studio, DSP/BIOS, MicroStar BGA, TMS320C28x, C28x, TMS320C2000 are trademarks of Texas Instruments. eZdsp is a trademark of Spectrum Digital.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is | current as of publication date. | Copyright © |
Products conform to specifications | per the terms of the Texas |
|
Instruments standard warranty. Production processing does not necessarily include testing of all parameters.