26
Breadmaker Owner’s Manual
9th press BAKE
10th press KEEP WARM
11th press NO EXTRAS
12th press Temperature
5. When you have finished, press PROGRAM for a final time. The word SAVE will flash.
Press SAVE/ERASE to save your personal program. To reject your program, press
STOP/RESET at any point in the programming process.
NOTE: You can also use pre-programmed Delay Bake in addition to the manually programmed
cycles. Use the and arrows to set the time difference after SAVE appears on the display
screen.
Suggestion: Record the recipe name and settings on forms provided on pages 102-107 to make
it easier to remember where to find the correct setting for these recipes.
Programming Your Personal Recipes
The Beyond Breadmaker allows you to pre-program five of your favorite recipes. The Beyond
Breadmaker’s flexible and easy-to-use features allow you to be as creative as you like. If you
want the dough to Knead for 10 minutes, de-gas (punch down) for 10 seconds, and rise for an
hour, just program in the numbers. If you want to skip a phase, press the or buttons until
the time reads “0”.

To use Program a personal recipe:

1. Make sure the display shows the clock (time of day). If the display shows some-
thing other than the clock, press STOP/RESET to clear the display.
2. Press SELECT repeatedly until PERSONAL RECIPE 1 appears in the display.
3. Press PROGRAM TIME/TEMP. “CUSTOM PROGRAM” appears in the upper left corner
of the display.
4. To program each stage of the baking cycle follow the procedure in the preceding
section, Customizing Pre-Programmed Baking Cycles starting on page 25.
Suggestion: Record the recipe name and settings on forms provided on pages 102-107 to make
it easier to remember where to find the correct setting for these recipes.

Resetting the Program & Personal Recipe Memory

Use the Save / Erase function to restore factory setting and to clear personal recipes and
custom programs.
1. Select the personal recipe or custom program you want to erase. Press SAVE /
ERASE The display will prompt SAVE or ERASE. Select for YES or for NO.
2. A beep will sound and the display will show “White 2 LB. Medium.”