At the beginning of the conference the mode set with “Broadcast Mode” in the Multipoint Setup menu is activated. You can switch the mode during communication.
1 Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2 Use the V, v, B or b button on the Remote Commander to select “Broadcast Mode”, then press the PUSH ENTER button.
Display Control
Display |
| Control | Broadcast Mode | ||
|
|
|
|
|
|
Far |
| Near |
| Split |
|
| Camera |
|
| ||
|
|
|
|
| |
|
|
|
|
|
|
Split: Selects the Split mode.
Split (A Fixed): Specifies the picture of the terminal connected first to fix in the Split (Fixed) mode.
Split (B Fixed): Specifies the picture of the terminal connected second to fix in the Split (Fixed) mode.
Split (C Fixed): Specifies the picture of the terminal connected third to fix in the Split (Fixed) mode.
Split (D Fixed): Specifies the picture of the terminal connected fourth to fix in the Split (Fixed) mode.
Split (E Fixed): Specifies the picture of the terminal connected fifth to fix in the Split (Fixed) mode.
Split (Near End Fixed): Fixes the local picture in the Split (Fixed) mode.
Voice Activate: Selects the Voice Activate mode.
Self Broadcast: Broadcasts the near end (local) party in the Broadcast mode.
A Broadcast: Broadcasts the picture of the terminal connected first in the Broadcast mode.
B Broadcast: Broadcasts the picture of the terminal connected second in the Broadcast mode.
C Broadcast: Broadcasts the picture of the terminal connected third in the Broadcast mode.
D Broadcast: Broadcasts the picture of the terminal connected fourth in the Broadcast mode.
E Broadcast: Broadcasts the picture of the terminal connected fifth in the Broadcast mode.
Stop Broadcast: Stops broadcasting in the Broadcast Mode.
146 Using the Display Control