
7 Use the V, v, B or b button to select “Save”, then press the PUSH ENTER button.
The settings are registered in the Phone Book.
To connect to the remote party without using BONDINGIf the videoconferencing system of the remote party is not equipped with the BONDING function, entering one telephone number does not allow you to connect all the line numbers used to connect to the remote party. To connect to the remote party by entering all the ISDN line numbers used, you can set the connection without using the BONDING function of this system.
Set “More Options Enable” to “On” in the Dial Setup menu (page 39), select the More Options button at the lower part of the List Edit menu to open the Dial Setup menu, then set “Bonding” to “Auto”. The A1, A2, B1, B2, C1 and C2 text boxes appear in the List Edit menu. Enter all the telephone numbers for the ISDN lines selected by “Number of Lines”. Up to
When “More Options Enable” is set to “On” in the Dial Setup menu, the More Options button is shown at the lower part of the List Edit menu.
Select the More Options button with the V, v, B or b button and press the PUSH ENTER button to open the Dial Setup menu. You can change the settings of the desired items.
Note
The contents set with the More Options button have priority over those set in the Dial Setup menu.
You can change the telephone number, IP address, name or setting registered in the Phone Book.
1 Open the Phone Book menu.
2 Use the V, v, B or b button to select the remote party to be changed in the Phone Book menu, then press the PUSH ENTER button.
The submenu appears.
Dial
Edit
Copy
Delete
3 Press the V or v button to select “Edit”, then press the PUSH ENTER button.
The List Edit menu appears.
4 Change the telephone number, IP address, name or setting.
5 Use the V, v, B or b button to select “Save”, then press the PUSH ENTER button.
The correction is completed.
54 Registering a Remote Party – Phone Book