Mic Select

Selects the microphone to be used. Internal: Uses the built-in microphone. External: Uses the microphone connected

to the Communication Terminal.

DSB MIC: Uses the microphone connected to the Data Solution Box.

DSB AUX IN: Used to expand future system capability.

Lip Sync

Selects whether to enable the Lip Sync function.

On: Enables the Lip Sync function. The movement of the speaker’s lips is synchronized with his voice.

Off: Disables the Lip Sync function.

Echo Canceler

Selects whether you use the echo canceler. Internal: Enables the built-in echo canceler. External: Uses the echo canceler of the

external equipment connected.

Off: Disables the built-in echo canceler.

Beep Sound

Selects whether the beep sounds when you press the button on the Remote Commander. On: Enables beep.

Off: Disables beep.

Recording Mute

When connecting a video cassette recorder to the AUDIO IN/AUDIO OUT (MIXED) jacks to record the sound for a conference, the recording mute function prevents echo from reflecting on a remote site. This item is only available when “Input Select” is set to “AUX” or “MIC + AUX”.

On: Enables the recording mute function.

Off: Disables the recording mute function.

General Setup MenuPage 1/3

General Setup

Page: 1/3

 

 

Terminal Name

 

 

Dual Monitor

On

 

Monitor Out

RGB OUT

 

Standby Mode

On

 

Standby Time

30 minutes

 

Time Display

On

 

 

Save

Cancel

Terminal Name

Input the terminal name to report when the system is connected to the external multipoint videoconferencing system.

Dual Monitor

When two monitors are connected to the System, selects whether you use the dual monitor mode.

On: Enables the dual monitor mode. Still images are always displayed on the second monitor.

Off: Disables the dual monitor mode. Still images are always displayed on the first monitor.

For details on the dual monitor mode, see “Using Two Monitors – Dual Monitor” on page 101.

Monitor Out (or Sub Monitor Out)

Selects the output connected to the monitor to which the signal is output.

This item changes to “Sub Monitor Out” if “Dual Monitor” is set to “On”, and selects the output connected to the sub-monitor (second monitor) to which the signal is output.

RGB OUT: Outputs from the RGB OUT connector on the Communication Terminal.

RGB OUT (DSB): Outputs from the RGB OUT connector on the Data Solution Box.

VIDEO OUT: Outputs from the VIDEO OUT MONITOR MAIN or SUB connector.

For details, see “Outputting Video Signals to External Equipment” on page 109.

Administrators System for Setup and Registration 2: Chapter

Registering Local Information 43