3 Select the line interface icon or a still image to be displayed in the Phone Book.

The icon is shown as “ LAN” or “ ISDN”.

4 Set up the line interface of the remote parties.

When “ LAN” is selected

Select “LAN bandwidth” to be used and enter the IP addresses of all the parties.

When “ ISDN” is selected

Enter the telephone numbers of all the parties.

To register a normal phone, enter the telephone number with “T” at the beginning. (e.g., T0312345678)

For details on the setups, see step 5 in “Registering a New Remote Party” on page 52.

5 Press the V or v button to select “Save”, then press the PUSH ENTER button.

The registration of the multipoint connection list is completed.

To specify a remote party registered in the Phone Book to the multipoint connection list

1 Use the V, v, B or b button on the Remote Commander to select the name you want to register in the multipoint connection list.

2 Press the button on the Remote Commander, or press the PUSH ENTER button to open the submenu, press the V or v button to select “ On”, then press the PUSH ENTER button.

Phone Book

RECENT

LAN

TOKYO Bob John

Recent

0-9

A-I

J-S

T-Z

LAN

ISDN

LAN

On

 

 

 

Dial

OSAKA

NEW YORK

PARIS

Edit

Copy

Delete

The (multipoint) mark is added to the upper left of the selected name in the list and the remote party is registered in the multipoint connection list.

You can add the marks for up to five parties using the same procedure as

above. The marks are displayed at the upper right corner of the Phone Book, showing how many points you registered for a multipoint connection.

Preparing for a multipoint videoconference 137

Videoconference Multipoint 7: Chapter