Page 1/7

ISDN Setup

Page: 1/7

 

Country/Region

ISDNUSA

Country/Region Code

1

Protocol

National ISDN

Save Cancel

Country/Region

Selects the country or region where you use the Communication Terminal.

You can select from among Europe (excluding France), France, Japan, USA and Other.

Country/Region Code

Enter the country code or region code.

For customers in the USA and Canada, see “SPID Setting for Customers in the USA and Canada” on page 47.

Protocol

Selects the protocol of the ISDN lines to be used.

You can select Japan (NTT), Euro ISDN, Euro ISDN (France), National ISDN, 5ESS(P-MP), 5ESS(P-P) or DMS-100 depending on the interface you are using.

For customers in the USA and Canada, see “SPID Setting for Customers in the USA and Canada” on page 47.

Page 2/7

Shows the A1 to C2 text boxes for inputting the telephone numbers.

ISDN Setup

Page: 2/7

Area Code

Local Number

A1

A2

B1

B2

C1

C2

Save Cancel

Area Code

Enter the area code to be used for the ISDN interface. Do not enter the first “0” number of your area code.

Local Number

Enter the telephone number (local number) to be used for the ISDN interface.

Note

The D1-F2 text boxes are shown on the next page (Page 3). Fill in the boxes depending on the lines you connect.

Page 4/7

Shows the A1 to C2 text boxes for inputting the telephone numbers.

ISDN Setup

Page: 4/7

Sub Address:

A1

A2

B1

B2

C1

C2

Save Cancel

Sub Address

Enter the sub-addresses when registering them. Only numerals are available for a sub- address.

Note

The D1-F2 text boxes are shown on the next page (Page 5). Fill in the boxes depending on the lines you connect.

Page 6/7

Shows the A1 to C2 text boxes for inputting the telephone numbers and the Auto SPID tab.

ISDN Setup

Page: 6/7

SPID

A1

A2

B1

B2

C1

C2

Auto SPID

Save

Cancel

46 Registering Local Information