SPID
This item is used only for customers in the USA and Canada.
For details, see “SPID Setting for Customers in the USA and Canada”.
Auto SPID
This item is used only for customers in the USA and Canada.
For details, see “SPID Setting for Customers in the USA and Canada”.
Note
•The
•The SPID menu does not appear depending on the protocol you selected on Page 1.
SPID Setting for Customers in the USA and CanadaIf you connect to an ISDN switch type, configuration of SPID (Service Profile Identifier) is required. When you select “Auto SPID” in the ISDN Setup Wizard (see page 28), the “Area Code”, “Local Number” and “SPID” setup items are automatically set.
If “Auto SPID” is not available in your area, set up SPID manually using the ISDN Setup menu.
1 Open the ISDN Setup menu.
2 Enter the country code in the Country/ Region Code text box depending on the network switch type you are using.
AT&T 5ESS (National ISDN), NTI
AT&T 5ESS (Multipoint Custom ISDN): Enter “1*10”.
AT&T 5ESS
NTI
“1*11”.
ISDN Setup
Page: 1/7
Country/RegionISDNUSA
Country/Region Code | 1 |
Protocol | National ISDN |
Save Cancel
3 Open Page 2 of the ISDN Setup menu to enter the LDN (Local Directory Number) in the Local Number text boxes.
When you use the AT&T 5ESS (Multipoint Custom ISDN) or AT&T 5ESS
Enter the same LDNs in the A1 and A2 (B1 and B2, C1 and C2, depending on the number of lines you use) text boxes.
ISDN Setup
Page: 2/7
| Area Code | Local Number |
A1 | 408 | 9876532 |
A2 | 408 | 9876532 |
B1
B2
C1
C2
Save Cancel
When you use the NTI
Enter the different LDNs in the A1 and A2 (B1 and B2, C1 and C2, depending on the number of lines you use) text boxes. These switch types are given a separate number for each channel.
Administrators System for Setup and Registration 2: Chapter
Registering Local Information 47