cPOWER indicator (green) Lights when the power switch on the Communication Terminal is set to on and goes out when it is set to off or the Terminal is set to standby mode.
dRemote sensorPoint the Remote Commander to the sensor when operating this System.
MIC
ON/OFF
VOLUME
DISPLAY
CLEAR
PinP
BACK
SPACE
ZOOM
VIDEOINPUT
SELECT
SYMBOL
FAR/NEAR
ALPHA/
NUM
Receives the infrared wireless signal from the optional
fTERMINAL connector Connect to the CAMERA UNIT connector on the Communication Terminal.
gVISCA OUT connectorThe connector does not function with this System.
hTripod holeUse to attach the camera on a tripod.
PUSH
ENTER
RETURN | MENU |
CONNECT/
DISCONNECT
HELP
You can set for a beep not to sound by pressing the button on the Remote Commander with the Audio Setup menu.
For the setting, see “Audio Setup Menu” on page 42.
a MIC ON/OFF buttonCuts off the local sound to be sent to a remote party. To restore the sound, press
the button again. | Appendix |
| |
b VOLUME +/– button |
|
Adjusts the volume of the sound |
|
received from a remote party. |
|
+: to increase the volume |
|
|
Location and Function of Parts and Controls 157