Setting Up the System for the First Time — Initial Setup Wizard

When you turn on the Communication Terminal for the first time after installation and the self-diagnosis is completed, the setup wizard appears on the monitor screen. Register your local system data with the setup wizard using the Remote Commander.

Notes

•You can change the settings made with the setup wizard later using the Setup menus.

•The setup wizard will also be displayed when you install the PCS-B768 ISDN Unit to your system later. Perform the setup again.

1 Select the language used for the on- screen menus and messages in the Language Setup Wizard.

Language: Select one of seven languages; English, French, German, Japanese, Spanish, Italian, Chinese.

Language Setup Wizard

LanguageEnglish

NextCancel

2 Use the V, v, B or b button on the Remote Commander to select “Next”, then press the PUSH ENTER button.

The ISDN Setup Wizard appears when the PCS-B768 ISDN Unit is connected. When the ISDN Unit is not connected, the LAN Setup Wizard is displayed.

Proceed to step 9.

3 Set the following items on the ISDN line.

ISDN Setup Wizard

Country/Region

USA

 

Country/Region Code

1

 

Protocol

National ISDN

 

Previous

Next

Cancel

Country/Region: Select your country or region.

Country/Region Code: Enter your country code or region code with the number buttons on the Remote Commander.

Protocol: Select the protocol of the ISDN line you are using.

4 Use the V, v, B or b button to select “Next”, then press the PUSH ENTER button.

5 Enter the telephone number of the ISDN used by the system.

When you use one ISDN line, enter the same number both in the A1 and A2 text boxes (except for the USA and Canada).

Area Code

Local Number

A1

A2

B1

B2

C1

C2

Previous

Next

Cancel

Area Code: Enter the area code. Do not enter the first “0” number.

Local Number: Enter the telephone number.

28 Setting Up the System for the First Time — Initial Setup Wizard