gMIC1/MIC2 (PLUG IN POWER) jacks (minijack)

Connect to the optional PCS-A1 or PCS- A300 microphone. Power is supplied to the microphone from the Communication Terminal.

hISDN UNIT connector

Connect to the TERMINAL connector on the optional PCS-B768 ISDN Unit.

iWHITE BOARD connector Connect to the optional mimio Xi.

jVIDEO OUT AUX jack (phono) Connect to the video input of the TV monitor or VCR.

kVIDEO OUT MONITOR MAIN connector (mini DIN 4-pin) Connect to the S-video input on the TV monitor or VCR.

lVIDEO OUT MONITOR SUB connector (mini DIN 4-pin) Connect to the S-video input on the second TV monitor when the system uses the dual monitor mode.

mRGB OUT connector (D-sub 15- pin)

Connect to the RGB input of the optional projector or display unit.

nIR OUT 1/2 jacks (minijack) Connect the supplied IR repeater. Connect the IR repeater for the monitor connected to the VIDEO OUT MONITOR MAIN connector to the IR OUT 1 jack, and the IR repeater for the monitor connected to the VIDEO OUT MONITOR SUB connector to the IR OUT 2 jack.

o100BASE-TX/10BASE-T connector (8-pin modular)

Used to conduct a conference via a LAN. Connect to a hub using the category 5 cable.

pDSB connector (D-sub 15-pin) Connect to the TERMINAL connector on the optional PCS-DSB1 Data Solution Box.

qDC 19.5V jack

Connect the supplied PCS-AC195 AC power adaptor.

rU (ground) terminal Connect a ground wire.

PCS-C1/C1P Camera Unit

Front

1

3

42

5

Rear

TERMINAL

VISCA OUT

6 7

Bottom

8

156 Location and Function of Parts and Controls