Number of Lines
Selects the number of ISDN channels used to receive a call.
You can select from among 1B, 2B, 3B, 4B, 5B, 6B, 8B and 12B channels.
Restrict
Selects the transmission rate of the ISDN lines when a call comes in.
Auto: Selects when connecting a remote party via a normal ISDN line.
56 K: Selects when connecting a remote party in a region or country where 56 Kbps is used for the ISDN transmission rate.
Note
The system is set to connect an ISDN line at the transmission rate of 64 Kbps at the factory. However, some countries such as the USA or some regions may use the ISDN transmission rate of 64 Kbps and 56 Kbps. You may not communicate with such country or region with the transmission rate of 64 Kbps. In this case, set “Restrict” to “56K” before dialing.
LAN Bandwidth
Select the bandwidth to be used when connected to a LAN.
You can select from among 64 Kbps, 128 Kbps, 384 Kbps, 768 Kbps, 1024 Kbps, 1920 Kbps and “Other”.
When “Other” is selected, a bandwidth value between 1 and 1920 Kbps can be entered.
ISDN MSN
Selects whether you are using the Multiple Subscriber Number.
On: Selects when you use the Multiple Subscriber Number.
Off: Selects when you do not use the
Multiple Subscriber Number.
Answer Setup
Page: 2/2 |
|
|
Video Mode | ISDNALL |
|
Video Frame | 15fps |
|
Audio Mode | ALL |
|
Far End Camera Control | On |
|
T.120 Data | On |
|
| Save | Cancel |
Video Mode
Selects the compression format of the pictures to be received from a remote party. ALL: Receives pictures of any compression
format depending on the format used on the remote site.
MPEG4: Receives pictures based on the MPEG4 format.
H.263+: Receives pictures based on Recommendation H.263+.
H.261: Receives pictures based on Recommendation H.261.
Video Frame
Selects the number of video frame to be received.
15 fps: Receives CIF format pictures at a maximum rate of 15 frames per second.
30 fps: Receives CIF format pictures at a maximum rate of 30 frames per second.
Audio Mode
Selects the compression format of audio to be received from a remote party.
ALL: Receives any audio compression format depending on the format used on the remote site.
MPEG4 Audio: Receives audio based on the MPEG4 format.
G.722.1: Receives audio based on the G.722.1 standard.
G.722: Receives audio based on the G.722 standard.
G.729: Receives audio based on the G.729 standard.
G.728: Receives audio based on the G.728 standard.
G.723.1: Receives audio based on the G.723.1 standard.
G.711: Receives audio based on the G.711 standard.
40 Registering Local Information